Specializing in car & truck lifts, brake lathes, pipe benders, tire changers, and wheel balancers, and much more! ARESCO, Inc. is the source for all of your automotive equipment needs. We carry a full line of equipment and replacement parts for most makes and models. With over 25 years of experience in the automotive industry, we at ARESCO are committed to providing our customers with quality products and service.
ALI Certified Two Post and four post Lifts
1-877-2ARESCO
Automotive Repair Equipment Supply COmpany
or 1-877-227-3726
TLT210-XT LAUNCH 10,000 lb lift

Adjustable Column Height
Adjustable Column Width
Rubber Door Guards
Outer Hose Guards
Stackable Foot Pads Extensions
Single Point Lock Release
Heavy Duty Arm Resraint System
Double Telescoping Screw Pads
Powder Coat Finish

TP10KAC-D 10,000 lb lift

Dual Cylinder direct pull lifting
Single piece Column from rolled steel
Extra long carriage puts less stress on slider blocks
Padded cut-off bar.automatic electric override
Two point lock release
Free mounting hardware
Stackable truck adapters standard 1",3", and 6"
Powder coat paint finish
TP12KC-DE 12,000 lb lift

Long lasting direct drive cylinders
Extra long (48") carriage for less wear on sliders
padded overhead cut-off bar
Single point pneumatic lock release
Drop in adapters standard
Powder coat paint finish
TLT-211-AS LAUNCH 11,000 lb lift

Adjustable Column Height
Adjustable Column Width
Rubber Door Guards
Outer Hose Guards
Stackable Foot Pads Extensions
Single Point Lock Release
Heavy Duty Arm Resraint System
Double Telescoping Screw Pads
Powder Coat Finish
HD-9STX Bendpak 9,000 lb Lift
9,000 lb capacity
Freestanding design
Narrow-width
High-rise
Perfect for parking, storage and service
Fully enclosed lifting cables, safety locks and sheaves
Internal anti-sway slider blocks in each column
Adjustable lock ladders
Runways feature non-skid surface
Push-button pneumatic safety release
HD-9XW Bendpak 9,000 lb Lift
9,000 lb capacity
Freestanding design
High-rise
Perfect for parking,storage and service
Runways accommodate narrow and standard vehicles
Electric/hydraulic power system
Fully enclosed lifting cables,safety locks and sheaves
Multi-position safety locks in each column
Adjustable lock ladders
Runways feature non-skid surface
HDS-14X Bendpak 14,000 lb Lift
14,000 lb capacity
Mid-to long-style approach ramps for low ground clearance vehicles
Fully enclosed lifting cables,safety locks,and sheaves
Internal anti-sway slider blocks in each column
Pneumatic push-button safety release
Features heavy-duty 1/2" aircraft cable
Safety locks enclosed in columns minimize pinch points
Oversized sheave diameter reduces cable fatigue
Oversized self-lubricating cable rollers
Rugged 1 3/4" roller axles
Multi-position safety locks in each column
HD-9 Bendpak 9,000 lb Lift
9,000 lb capacity
Freestanding design
Perfect for parking, storage and service
Runways accommodate narrow and standard vehicles
Runways include rail-kit for optional accessories
Fully enclosed lifting cables, safety locks and sheaves
Push-button pneumatic safety release
Mult-position safety locks in each column
Independent backup slack-cable safety latches
QL9K Quality 9,000 lb Lift

Free standing or bolt-down option
Formed runways with rail system,single hydraulic cylinder and commercial grade cabling system
Formed columns with 12" base and internal locks
Adjustable internal lock ladder for lift leveling
"slack cable" system provides additional security
Available in Blue,Red and Black
792 N Perry St Pontiac MI 48342
SPO-10 Rotary 10,000 lb

Trust The Industry Standard Symmetrical 10,000 lb. Two Post

True Symmetrical column design
Customizable with your choice of arms and adapters
Extended height models available for added versatility
ALI Gold Certified (SPO10X)

SPOA-10 Rotary 10,000 lb

Trust the industry’s original and proven Asymmetrical lift. Why go anywhere else?

True asymmetrical rotated column design
Performance tested to 20,000 lift cycles
Manufactured with nearly 90 years of lift expertise
ALI Gold Certified (SPOA10X)
SPO-18 18,000 lb 2 Post Lift
“Double S” Column Design
Thread Up Adapters
Comes With (6) Additional Adapters For An Additional 10" Of Reach
ALI Gold Certified (SPO18X)


SPO-15 15,000 lb 2 Post Lift
Trust The Industry Standard Symmetrical 15,000 lb. Two Post

Overhead cables insures proper equalization of the carriages, while providing an unobstructed floor
Stackable adapters make contact to the vehicle quick and easy The locking system engages every 4” and is fully accessible for maintenance
ALI Gold Certified (SPO15X)



Site Map
Home
Two Post Lifts Four Post Parking Lifts Heavy Duty Lifts Alignment Lifts Scissor Lifts Motorcycle Lifts
Shop Equipment Brake Lathes Pipe Benders Alignment Machines Wheel Balancers Tire Changers Air Compressors
Copyright©2014 www.aresco.org all rights reserved web design by M.Miller
HD-7P Bendpak 7,000 lb Lift
7,000 lb capacity
High lift with short runways
Runways include rail-kit for optional accessories
Runways include outside guide rails
Internal anti-sway slider blocks in each column
Features heavy-duty 3/8" aircraft cable
XPR-9DS Dual-Width, 9,000 Lb. Capacity, Direct-DriveBendPak XPR-9DS direct-drive floor plate two post liftThe BendPak XPR-9DS Two-Post Auto Lift is a peerless direct-drive car lifting solution. This super-industrial-strength piece of equipment has got it all: leading-edge technology, top of the line materials, design that's ahead of its time and a 9,000-pound lifting capacity. An open-top model, the XPR-9DS makes unobstructed floor-to-ceiling applications a breeze. Just the right size for shops with 13' ceilings and above.

XPR-10S 10,000-Lb. Capacity Two-Post Lift - Symmetric ClearfloorBendPak Two Post Car LiftThe BendPak XPR-10S offers exceptional direct-drive lifting performance with an important added benefit. This super-industrial-strength car lift has got it all: cutting-edge technology, top of the line materials, design that's ahead of its time and a 10,000 pound lifting capacity. Fits in shops with ceilings higher than 12', and it won't crowd your floor while you work beneath a vehicle.

low pro arm model available
168" height also available check for pricing

XPR-10AS Dual-Width, 10,000 Lb. Capacity, Two-Post Lift, Asymmetric, Screw PadXPR-10AS Two Post Car Lift from BendPakThe BendPak XPR-10AS offers exceptional direct-drive lifting performance with an important added benefit. We rotated both posts inward to give you the ability to open a vehicle's doors while it's still raised, all without sacrificing drive-thru clearance. This super-industrial-strength piece of equipment has got it all: cutting-edge technology, top of the line materials, design that's ahead of its time and a 10,000 pound lifting capacity. Fits in shops with ceilings higher than 12', and it won't crowd your floor while you work beneath a vehicle.

XPR-12CL 12,000 Lb. Capacity, Clearfloor, Triple-Telescope Arms-All FourBendPak XPR-12CL clear floor two post lift When you need to lift something heavy—really heavy—your best bet is always BendPak. Our super-duty models are pure brutish muscle. This XPR-12CL, for instance, has an astounding 12,000-lb. capacity and features heavier column construction, carriage construction and frame components than ever before. Like all our clearfloor lifts, this lift offers superior direct-drive performance, cutting-edge technology, top of the line materials and design that's ahead of its time. Fits in shops with ceilings higher than 14', and it won't crowd your floor while you work beneath a vehicle.