Atlas Pro-9D2 Post Lift
Specializing in car & truck lifts, brake lathes, pipe benders, tire changers, and wheel balancers, and much more! ARESCO, Inc. is the
source for all of your automotive equipment needs. We carry a full line of equipment and replacement parts for most makes and models.
With over 25 years of experience in the automotive industry, we at ARESCO are committed to providing our customers with quality
products and service.
Copyright©2014 www.aresco.org all rights reserved web design by M.Miller
22150 Eight Mile Rd. Southfield MI. 48033
The Atlas® Pro-9D is the perfect choice for those
customers who demand the most lifting capacity at the
lowest possible price. The Atlas® Pro-9D can be adjusted to
two different height settings: 11' 6" or 11' 10".
We test our competitors’ lifts and our Atlas® lifts. GET
The Atlas® Pro-9D has symmetric columns and specially
designed arms that can be set in either the symmetric or
asymmetric position. The asymmetric/symmetric arm
design offers an extremely low lift pad position on the
EZ-metric lift arm configuration. This low pad height will
allow the operator to position the lift arms under most
small cars (with low pick up points) and heavier pick up
The Atlas® Pro-9D includes: a complete set of solid peg
type truck adapters, mounting hardware, a set of sliding lift
point adapters, and a 220 volt single phase power unit that
can be mounted on either side of the lift. (The power unit
column must be on the correct side).
The Atlas® Pro-9D two post direct drive cylinder lifts have a
spring loaded Secondary Lock System (SLS) that
automatically engages in the event of a slack or broken
We have hydraulic oil in stock!
Greg Smith Equipment stocks a complete inventory of parts
for the equipment we sell.
Click here to view photos of our parts department.
The Atlas® Pro-9D
Atlas® Pro-9D Specifications
Capacity 9,000 LB.
Lifting Time Ask Your Salesperson
Overall Height 142" (11' 10") or 138" (11' 6")
Overall Width 140" (11' 8") (With Power Unit)
132" (11') (Without Power Unit)
Outside Column To Outside Column 122 1/2" (10' 2 1/2")
Maximum Lift Height
(Without Adapters) 77 5/8" (6' 5 5/8")
Maximum Lift Height
(With Adapters) 82 5/8" (6' 10 5/8")
Padded Bar Height 134 1/4" (11' 2 1/4")
Minimum Arm Height 4 1/2"
Inside Column 110 1/4" (9' 2 1/4")
Column Size 7 1/4" x 11"
Drive Thru 98" (8' 2") (Symmetric Arm Configuration)
88 3/4" (7' 4 3/4") (Asymmetric Arm Configuration)
Base of Lift 14 ½" x 18"
Column Thickness of Steel 5mm
Carriage Thickness of Steel 6mm
Arms Thickness of Steel 6mm
Cable Diameter .375"
Motor/Electrical Requirement 220V single (1) phase.
A 30 amp breaker is required.
Oil Requirement 3-5 Gallons AW32/AW46
Requires a minimum of 4" of concrete with 3000 psi.
Shipping Weight 1450 lbs.