Atlas PV-9P 2 Post Lift
Specializing in car & truck lifts, brake lathes, pipe benders, tire changers, and wheel balancers, and much more! ARESCO, Inc. is the source for all of your automotive equipment needs. We carry a full line of equipment and replacement parts for most makes and models. With over 25 years of experience in the automotive industry, we at ARESCO are committed to providing our customers with quality products and service.
1-877-2ARESCO
Automotive Repair Equipment Supply COmpany
or 1-877-227-3726
792 N Perry St Pontiac MI 48342
Site Map
Home
Two Post Lifts Four Post Parking Lifts Heavy Duty Lifts Alignment Lifts Scissor Lifts Motorcycle Lifts
Shop Equipment Brake Lathes Pipe Benders Alignment Machines Wheel Balancers Tire Changers Air Compressors
Copyright©2014 www.aresco.org all rights reserved web design by M.Miller
PV-9P Commercial Grade 2-Post Lift


Commercial Grade
9,000 LB. Capacity
EZ-Metric Arms
“Padded” Shut-Off Bar
Thick Rubber Covers On Carriages
Powder Coat Finish
Adjustable Height – 11' 10 ½” or 12' 6 ½”
Free 12 Piece Truck Adapter Set
Mounting Hardware Included
Shipping Weight: 1,500 LB.
The Atlas® PV-9P is a commercial grade two post lift that incorporates the same arm and carriage design as our Industry leader PV-10P. The PV-9P has symmetric columns and specially designed arms that can be set in either the symmetric or asymmetric position. The PV-9P has dual direct drive cylinders and single point lock release.

The Atlas® PV-9P is designed and engineered to safely lift (and work on) everything from a Smart Car® to a one ton dually.

Atlas® PV-9P Specifications
Setup Low High
Capacity 9,000 LB.
Overall Height on low setting 142 ½” (11' 10 ½”) High setting 150 ½” (12' 6 ½”)
Padded Bar Height on low setting 135 ½” (11' 3 ½”) on high setting 143 ½” (11' 11 ½”)
Overall Width 135" (11' 3")
Outside Column to Outside Column 125 ½” (10' 5 ½”)
Maximum Lift Height (Without Adapters) 71 ½” (5' 11 ½”)
Maximum Lift Height (With Adapters) 80 ½” (6' 8 ½”)
Minimum Arm Height 4 ½”
Inside Column 112 ¼” (9' 4 ¼”)
Column Size 6 ½” x 10 ½”
Column Thickness of Steel 5 gauge (.2", 5.08mm)
Drive Thru Symmetric/Asymmetric Configuration 99 ½” (8' 3 ½”) – Symmetric93" (7' 9") – Asymmetric
Base Of Lift 15” x 17”
Cable Diameter .375
Motor/Electrical Requirement 3 HP, 220 volt single (1) phase. A 30 amp breaker is recommended.
Shipping Weight 1,500 LBS.