Bendpak 14,000 lb Alignment Lifts
Specifications

Lifting capacity: 14,000 lbs. / 6,350 kg
Front axle max capacity: 7,000 lbs. / 3,175 kg
Rear axle min capacity: 7,000 lbs. / 3,175 kg
Overall front width: 143" / 3,632 mm
Overall rear width: 130” / 3,301 mm
Outside length: 215-1/2" / 5,473 mm
Overall length: 244" / 6,198 mm
Height of front columns: 97" / 2,464 mm
Height of rear columns: 95” / 2,413 mm
Runway min height: 7-3/4" / 196 mm
Max rise: 70" / 1,778 mm
Max lifting height: 77-5/8" / 1,970 mm
Width between front columns: 123" / 3,124 mm
Width between rear columns: 120” / 508 mm
Runway width: 20" / 508 mm
Width between runways: 45" / 1,143 mm
Length of runways: 199" / 5,054 mm
Min 4-wheel alignment: 89” / 2,261 mm
Max 4-wheel alignment: 156” / 3,962 mm
Max 2-wheel alignment: 182” / 4,623 mm
Min wheelbase @ rated capacity: 140” / 3,556 mm
Min wheelbase @ 75% capacity: 120” / 3,048 mm
Min wheelbase @ 50% capacity: 100” / 2,540 mm
Min wheelbase @ 25% capacity: 80” / 2,032 mm
Locking positions: 13
Lock spacing: every 4" / 102 mm
Lifting time: 60 sec
Motor: 220 VAC / 60 Hz / 1 Ph
Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

*Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201. Consult www.autolift.org for complete listings or contact BendPak via
Features

14,000 lb capacity
Huge cable sheaves reduce wear and tear
Extremely convienient open-front design for easy access
Extended runway length for servicing
Longer approach ramps for low ground clearance vehicles
Electric/hydraulic power system
Runways include rail-kit for optional accessories
Runways adjust for different tread widths
Automatic leveling system with multiple auto-leveling locking positions
Equipped with heavy-duty rear slip plates and front turn plates
Multiple turn plate pockets for better wheelbase accommodation
Single hydraulic cylinder mounted underneath runway
Fully enclosed lifting cables,safety locks,and sheaves
Internal anti-sway slider blocks in each column
Pneumatic Push-button safety release
Features heavy-duty 1/2" aircraft cable
Safety locks enclosed in columns minimize pinch points
Oversized sheave diameter reduces cable fatigue
Runways feature non-skid surface
Rugged,self lubricating cable sheaves
Features 1 3/8" sheave axles
Multi position safety locks in each column
Independent backup slack-cable safety latches
Includes fully adjustable lock stops for precise leveling


Options Available

Integrated rolling bridge airline kit
Roll-back kit
Drive-thru ramps
Drip trays
7,000 lb rolling jacks(model rj-7)

model#HDSO-14LSX
Specializing in car & truck lifts, brake lathes, pipe benders, tire changers, and wheel balancers, and much more! ARESCO, Inc. is the source for all of your automotive equipment needs. We carry a full line of equipment and replacement parts for most makes and models. With over 25 years of experience in the automotive industry, we at ARESCO are committed to providing our customers with quality products and service.
1-877-2ARESCO
Automotive Repair Equipment Supply COmpany
or 1-877-227-3726
792 N Perry St Pontiac MI 48342
Site Map
Home
Two Post Lifts Four Post Parking Lifts Heavy Duty Lifts Alignment Lifts Scissor Lifts Motorcycle Lifts
Shop Equipment Brake Lathes Pipe Benders Alignment Machines Wheel Balancers Tire Changers Air Compressors
Copyright©2014 www.aresco.org all rights reserved web design by M.Miller