Dannmar Two Post 10,000 lb Lift
Automotive Repair Equipment Supply COmpany
Specializing in car & truck lifts, brake lathes, pipe benders, tire changers, and wheel balancers, and much more! ARESCO, Inc. is the
source for all of your automotive equipment needs. We carry a full line of equipment and replacement parts for most makes and models.
With over 25 years of experience in the automotive industry, we at ARESCO are committed to providing our customers with quality
products and service.
792 N Perry St Pontiac MI 48342
Lifting Capacity: 10,000 lbs. / 4546 kg.
Overall Height: 145" / 3683 mm.
Overall Width (Outside of Base plates): 130 ½".
Overall Width (Outside of Columns): 123 ½".
Width Between Columns: 99 ¾".
Minimum Reach (Front Arm): 25.5" / 651 mm.
Maximum Reach (Front Arm): 39.7" /1009 mm.
Minimum Reach (Rear Arm): 40.3" / 1024 mm.
Maximum Reach (Rear Arm): 58" / 1474 mm.
Minimum Pad Height: 4-1/2" / 114 mm.
Rise: 69" / 1753 mm.
Maximum Lifting Height (Pad Only): 73" / 1854 mm.
Maximum Lifting Height (Pad & 6" Adapter): 79" /
Drive Thru Clearance: 87 ½".
Motor: 220 VAC 60Hz. 1Ph
Automatic Arm Restraints
These arm restraints lock
automatically as soon as the
lift is engaged. Seizing any
horizontal arm movement once
elevated. Just another step in
Automatic Shut-Off Bar
A heavy-duty steel, padded
safety shutoff bar
automatically stops the
lifting mechanism if a vehicle
touches the top of the lift.
Saving you from thousands in
potential damage to the car
Every Dannmar 2-Post Lift
comes standard with
over-sized baseplates to
completely hault any back
and forth sway; and greatly
reduce fatigue on concrete.
The bigger the footprint, the
more safe the lift becomes.
Heavy-Duty Steel Cable Sheaves
The sheaves used to keep the
aircraft-quality cables in line are made
from heavy-duty steel, and with a 3"
diameter, these are not your regular
run-of-the-mill cable sheaves.
We use ultra-high molecular
weight polyethylene load
bearings to protect the
inside of the columns,
increasing the longevity of
the lifting mechanisms, and
providing years of smooth,
no snag, lifting.
Single-Point Safety Release
For conveniently releasing the
safety locks from one side of the
lift. The safety locks are in each
column, spaced 3" apart. This
many locking points ensures that
you will find a comfortable working
height, and it also is a huge step in
becoming ALI approved for lift
Our unique dual-synchro
equalization system haults any
side from lifting faster than the
other. This ensures that the safety
locks will be engaged at the same
time, and also makes sure that
both arms are lifted evenly at all
times - reducing stress on many
lift components. We purposely
manufacture the columns using
single-piece construction for
added strength and less fatigue
under heavy load conditions.
Clear Floor Workability
The clear-floor convenience of
the Brigadier series lifts is just
another feature directed
towards the end-user. It allows
for oil drains, tool boxes,
transmission jacks, and many
other useful pieces of
equipment to be unobstructed
under the lift. Making your job
just that much easier.
Optional Frame Cradle
Optional frame cradle
adapters are the perfect
solution for raising certain
vans or pickups. Rubber
contact pads allow for
protection for underbody
vehicle components and
These unique baseplate
adapter seats will stop any
worry of losing your
all-too-necessary lift pad
adapters. Just another way
to provide ease-of-use to
Free Truck and Van
Others might charge
extra for these
necessary adapters, but
they're standard with
every Dannmar 2-Post
Lift. Ideal for trucks and
vans with running
boards or auxiliary fuel
The hydraulic power unit uses a
single-phase motor that
requires 208-230 volts AC and a
25 amp breaker. A simple
push-button switch raises the
lift and a push-lever controls
The Brigadier 10AC is ALI / ETL Certified. This asymmetric
two-post lift is expertly designed- built with strength and
rugged durability in mind. The Brigadier 10AC is a 10,000
pound asymmetric vehicle lift that is specifically designed
with posts that are rotated inward by 30 degrees. This allows
the vehicle to be off-set back farther, to provide greater
access to technicians for moving in and out of the vehicle. In
addition, this lift works perfectly in shallow repair bays or
areas where space is at a premium.
The Brigadier 10AC will out-perform others in its class at a
highly affordable cost. Everything from the "Dura-Glide"
polyethylene load bearings, to the heavy duty 3/8" equalizer
cable have been carefully chosen for long lasting operation.
Dannmar Two-post Vehicle Lifts 10,000 lbs lifting
Specifically designed with posts that are rotated in
30 degrees to offset the vehicle center point back
for ease of entry into the vehicle
Narrow space saving design works perfectly in
almost any sized repair bay
Dual-Synchro equalization system maintains equal
Maintenance-free, "Dura-Glide" polyethylene load
Single-piece columns for added strength and less
Dual hydraulic cylinders combined with
"direct-drive" lifting system provides 2-to-1 lifting
speed and rugged dependability
Heavy-duty lift arms feature automatic safety
Comes standard with eight piece truck and van
Includes detailed installation and maintenance
instructions, graphic safety and maintenance
decals, and safety instruction placard guidelines.
Oversize column base plates provide strong support
Safety locks in each column spaced every three
Heavy-duty 3/8" equalizer cables
Copyright©2014 www.aresco.org all rights reserved web design by M.Miller