Bendpak Two Post 12,000 lb Lift
Model # XPR-12CL
Specifications

MODEL XPR-12CL
Lifting Capacity* 12,000 ?lbs. / 5,443 kg.
*Max Capacity / Front Axle 6,000 lbs. / 2,722 kg.
*Max Capacity / Rear Axle 6,000 lbs. / 2,722 kg.
A - Height Overall: 170" / 4,318 mm*
B - Width Overall (Outside of Base Plate): 155" / 3,937 mm.
C - Width (Outside of Columns): 144" / 3,658 mm.
D - Floor To Overhead Switch: 165" / 4,191 mm.*
E - Inside Columns: 120" / 3,048 mm.
F - Reach (Front Arm Min.): 32" / 813 mm.
G - Reach (Front Arm Max.): 60" / 1,524 mm.
H - Reach (Rear Arm Min.): 32" / 813 mm.
I - Reach (Rear Arm Max.): 60" / 1,524 mm.
J - Min. Pad Height: 5" / 127 mm.
K - Rise: 69" / 1,753 mm.
L - Max Lift Height (Pad Only): 74" / 1,880 mm.
M - Max Lift Height (?5" Adapter): ?79" / 2,007 mm.
N - Drive-Thru Clearance: 106" / 2,692 mm.
Motor (**) 220 VAC / 60 Hz. 1Ph.
Time of full Rise: 45 Seconds
Max Load Per Arm: 3,000? lbs. / 1,361 ?kg.
Features
12,000-lb lifting capacity
Padded overhead safety shutoff bar
Taller column height provides greater overhead clearance
Single-piece columns / model XPR-12CL
Bolt-on column extensions / model XPR-12CL-192
Single-point safety release
Drop-end arms provide a lower pad height
Dual hydraulic direct-drive cylinders
Oversized 53" tall carriage for superior strength and durability
Electric / hydraulic power system
Oversized A36 steel base plate
Self-lubricating dura-glide UHMW polyethylene bearing system
Safety locks in each column spaced every 3"
Triple-telescoping front and rear arms
Automatic arm restraints
Heavy-duty 1/2" aircraft-quality equalizer cables
6” diameter machined steel cable sheaves reduces cable fatigue
8-piece truck and van adapter set STANDARD
Frame cradle pads STANDARD
Round rubber contact pads STANDARD
ALI certified

Specializing in car & truck lifts, brake lathes, pipe benders, tire changers, and wheel balancers, and much more! ARESCO, Inc. is the source for all of your automotive equipment needs. We carry a full line of equipment and replacement parts for most makes and models. With over 25 years of experience in the automotive industry, we at ARESCO are committed to providing our customers with quality products and service.
1-877-2ARESCO
Automotive Repair Equipment Supply COmpany
or 1-877-227-3726
792 N Perry St Pontiac MI 48342
Site Map
Home
Two Post Lifts Four Post Parking Lifts Heavy Duty Lifts Alignment Lifts Scissor Lifts Motorcycle Lifts
Shop Equipment Brake Lathes Pipe Benders Alignment Machines Wheel Balancers Tire Changers Air Compressors
Copyright©2014 www.aresco.org all rights reserved web design by M.Miller