|
|
Bendpak Two Post 20,000 lb Lift
1-877-2ARESCO
or 1-877-227-3726
22150 Eight Mile Rd. Southfield MI. 48033
Specializing in car & truck lifts, brake lathes, pipe benders, tire changers, and wheel balancers, and much more! ARESCO is the source
for all of your automotive equipment needs. We carry a full line of equipment and replacement parts for most makes and models. With over
25 years of experience in the automotive industry, we at ARESCO are committed to providing our customers with quality products and
service.
Home Two Post Lifts Four Post Parking Lifts Heavy Duty Lifts Alignment Lifts Scissor Lifts Motorcycle Lifts
Copyright©2014 www.aresco.org all rights reserved web design by M.Miller
20,000-lb. Capacity / Adaptable
Clearfloor / High-Rise /
Heavy-Duty Twin Post Lift
Experience unparalleled direct-drive lifting performance with the 20AP two-post lift. This heavy-duty car lift is built with top-of-the-line materials, boasts cutting-edge technology, and features a design that’s ahead of its time. With a lifting capacity of 20,000 lbs., it’s engineered to handle heavy loads with ease, making it a standout choice for automotive professionals seeking reliability and efficiency.
Experience unparalleled direct-drive lifting performance with the 20AP two-post lift. This heavy-duty car lift is built with top-of-the-line materials, boasts cutting-edge technology, and features a design that’s ahead of its time. With a lifting capacity of 20,000 lbs., it’s engineered to handle heavy loads with ease, making it a standout choice for automotive professionals seeking reliability and efficiency.
Lifting Capacity-20,000 lbs. / 9,072 kg
A - Max. Rise (no Safety Lock engaged) 1-76.5 in. (1,943 mm)
B1 - Max. Lifting Height w/ Pad (Top Lock) 2-82.75 in. (2,103 mm)
B2 - Max. Lifting Height w/Pad (no Lock) 3-83.25 in. (2,114 mm)
C - Max. Lifting Height w/Adapters (Top Lock) 4-90.25 in. (2,292 mm)
D - Min. Height w/ Pad-8 in. (206 mm)
E - Overall Height-169 in. (4,294 mm)
F - Width Overall-168 in. (4,267 mm)
G - Outside Posts-149 in. (3,785 mm)
H - Inside Posts-126 in. (3,199 mm)
I - Drive-Thru Width-107.75 in. (2,742 mm)
J - Floor to Top Switch-162.5 in.(4,128 mm)
K - Lift Arm Reach (min. - max.)-35 in. to 62 in. (893 mm to 1,678 mm)
L - Base Plate Width-28 in. (710 mm)
M - Post to Base Plate-9.5 in. (241 mm)
Time to Full Rise-˜ 79 seconds
Operating Pressure at Maximum Load-2,647 psi
A - Max. Rise (no Safety Lock engaged) 1-76.5 in. (1,943 mm)
B1 - Max. Lifting Height w/ Pad (Top Lock) 2-82.75 in. (2,103 mm)
B2 - Max. Lifting Height w/Pad (no Lock) 3-83.25 in. (2,114 mm)
C - Max. Lifting Height w/Adapters (Top Lock) 4-90.25 in. (2,292 mm)
D - Min. Height w/ Pad-8 in. (206 mm)
E - Overall Height-169 in. (4,294 mm)
F - Width Overall-168 in. (4,267 mm)
G - Outside Posts-149 in. (3,785 mm)
H - Inside Posts-126 in. (3,199 mm)
I - Drive-Thru Width-107.75 in. (2,742 mm)
J - Floor to Top Switch-162.5 in.(4,128 mm)
K - Lift Arm Reach (min. - max.)-35 in. to 62 in. (893 mm to 1,678 mm)
L - Base Plate Width-28 in. (710 mm)
M - Post to Base Plate-9.5 in. (241 mm)
Time to Full Rise-˜ 79 seconds
Operating Pressure at Maximum Load-2,647 psi
Durable powder coat finish
Expandable top beam accommodates wide or narrow drive-thru configurations
Double-telescoping screw pads offer increased versatility
Padded overhead safety shutoff bar
Single-point safety release
Drop-end arms provide a lower pad height
Dual hydraulic direct-drive cylinders
Electric / hydraulic HVLP power system
Self-lubricating dura-glide UHMW polyethylene bearing system
Automatic arm restraints withstand over 2000-pounds of side force
Oversized cable sheave diameter reduces cable fatigue
ALI Certified
Expandable top beam accommodates wide or narrow drive-thru configurations
Double-telescoping screw pads offer increased versatility
Padded overhead safety shutoff bar
Single-point safety release
Drop-end arms provide a lower pad height
Dual hydraulic direct-drive cylinders
Electric / hydraulic HVLP power system
Self-lubricating dura-glide UHMW polyethylene bearing system
Automatic arm restraints withstand over 2000-pounds of side force
Oversized cable sheave diameter reduces cable fatigue
ALI Certified
description
In the dynamic world of automotive repair, staying equipped with the latest tools is crucial for keeping pace with evolving technology. BendPak’s AP Series of two-post lifts represents a significant leap forward in car lift engineering. By integrating the finest features from existing lift types, this innovative design sets new industry standards. Built to withstand heavy-duty usage, handle high loads, and prioritize both operator safety and efficiency, the 20AP is truly a standout solution.
Automatic Arm Restraint System Prevents Unplanned Movement
For decades, swing arms restraints have been integral to two-post lifts, minimizing the risk of arm shifting during vehicle loading and servicing. Despite that, traditional systems often struggle to withstand the considerable forces exerted when vehicles unexpectedly shift on support pads or adapters. This challenge arises from factors like improper loading or the addition/removal of heavy drivetrain components, resulting in an unanticipated shift in the vehicle’s center of balance.
BendPak’s AP Series introduces a groundbreaking solution: the Automatic Swing Arm Restraint System (ASARS). Engineered to tackle these challenges head-on, ASARS is fortified to withstand the elevated pushing and pulling forces encountered during vehicle service. This innovative design feature sets the AP Series apart, making it exceptionally well-suited for heavy vehicle service tasks.
The patented Automatic Swing Arm Restraint System in BendPak’s AP Series offers a remarkable 360-degree load-holding grip. Crafted from heavily forged steel, this exclusive design secures lift arms with over 2000 pounds of force, preventing unplanned movement during lift operation and vehicle servicing. Notably, this adaptive system requires minimal operator intervention while delivering unmatched holding power. Its distinctive power-hold design ensures precise, non-shifting action, with a convenient quick-release operator lever for instant clamping pressure release.
Rugged Enough to Stand up to Anything
Every Super-Duty AP Series lift delivers the no-compromise construction, durability, and other advantages that only the industry’s number one lift manufacturer can provide. Including the highest consumer confidence and safety rating, longest warranty, lowest cost of ownership and superior ergonomics that make your operators more productive and your operation more profitable. Bottom line, BendPak lifts are designed better, built better, and supported better than any other vehicle service lift in the world – which explains why BendPak makes and sells more lifts than anyone.
Innovative Safety Lock System
BendPak’s patented automatic safety lock system is engineered to significantly enhance operator efficiency and safety. With its simple yet innovative design, the system ensures automatic safety lock engagement throughout all lift rising operations. What’s more, an ergonomic single-point release mechanism enables operators to effortlessly disengage the safety locks during lift descent – all with the push of a single finger. It’s just that easy.
High-Strength Multi-Face Columns
Our revolutionary multi-face metal columns redefine strength and durability, especially under biaxial loading conditions. Unlike traditional single-formed columns, our innovative design incorporates multiple faces, strategically engineered to distribute loads more efficiently. This unique configuration enhances the structural rigidity and integrity of the columns, enabling them to withstand higher levels of stress and strain from varying directions simultaneously. By evenly dispersing forces during biaxial loading conditions, our multi-face columns provide unparalleled stability and resilience, ensuring optimal performance even in the most demanding environments, making them the ideal choice for any lifting application.
In the dynamic world of automotive repair, staying equipped with the latest tools is crucial for keeping pace with evolving technology. BendPak’s AP Series of two-post lifts represents a significant leap forward in car lift engineering. By integrating the finest features from existing lift types, this innovative design sets new industry standards. Built to withstand heavy-duty usage, handle high loads, and prioritize both operator safety and efficiency, the 20AP is truly a standout solution.
Automatic Arm Restraint System Prevents Unplanned Movement
For decades, swing arms restraints have been integral to two-post lifts, minimizing the risk of arm shifting during vehicle loading and servicing. Despite that, traditional systems often struggle to withstand the considerable forces exerted when vehicles unexpectedly shift on support pads or adapters. This challenge arises from factors like improper loading or the addition/removal of heavy drivetrain components, resulting in an unanticipated shift in the vehicle’s center of balance.
BendPak’s AP Series introduces a groundbreaking solution: the Automatic Swing Arm Restraint System (ASARS). Engineered to tackle these challenges head-on, ASARS is fortified to withstand the elevated pushing and pulling forces encountered during vehicle service. This innovative design feature sets the AP Series apart, making it exceptionally well-suited for heavy vehicle service tasks.
The patented Automatic Swing Arm Restraint System in BendPak’s AP Series offers a remarkable 360-degree load-holding grip. Crafted from heavily forged steel, this exclusive design secures lift arms with over 2000 pounds of force, preventing unplanned movement during lift operation and vehicle servicing. Notably, this adaptive system requires minimal operator intervention while delivering unmatched holding power. Its distinctive power-hold design ensures precise, non-shifting action, with a convenient quick-release operator lever for instant clamping pressure release.
Rugged Enough to Stand up to Anything
Every Super-Duty AP Series lift delivers the no-compromise construction, durability, and other advantages that only the industry’s number one lift manufacturer can provide. Including the highest consumer confidence and safety rating, longest warranty, lowest cost of ownership and superior ergonomics that make your operators more productive and your operation more profitable. Bottom line, BendPak lifts are designed better, built better, and supported better than any other vehicle service lift in the world – which explains why BendPak makes and sells more lifts than anyone.
Innovative Safety Lock System
BendPak’s patented automatic safety lock system is engineered to significantly enhance operator efficiency and safety. With its simple yet innovative design, the system ensures automatic safety lock engagement throughout all lift rising operations. What’s more, an ergonomic single-point release mechanism enables operators to effortlessly disengage the safety locks during lift descent – all with the push of a single finger. It’s just that easy.
High-Strength Multi-Face Columns
Our revolutionary multi-face metal columns redefine strength and durability, especially under biaxial loading conditions. Unlike traditional single-formed columns, our innovative design incorporates multiple faces, strategically engineered to distribute loads more efficiently. This unique configuration enhances the structural rigidity and integrity of the columns, enabling them to withstand higher levels of stress and strain from varying directions simultaneously. By evenly dispersing forces during biaxial loading conditions, our multi-face columns provide unparalleled stability and resilience, ensuring optimal performance even in the most demanding environments, making them the ideal choice for any lifting application.