|
|
XT150 WASTE OIL HEATER
The XT-150 Waste Oil Heater now burns 100% used synthetic oil along with other used fluids. It comes standard with an easy access hinged chamber door for easy clean out. It also features a large clean-out side-access panel to the collector box.
Heat Range (BTUH)* Up to 150,000
Fuel Input (GPH) 1.1
Fuel Type† Waste oil (used crankcase oil up to 50 wt), used synthetic oil, used #1 and #2 fuel oil, used C.C. synthetic ATF #1 and #2, used automatic transmission fluid
The XT-150 Waste Oil Heater now burns 100% used synthetic oil along with other used fluids. It comes standard with an easy access hinged chamber door for easy clean out. It also features a large clean-out side-access panel to the collector box.
Heat Range (BTUH)* Up to 150,000
Fuel Input (GPH) 1.1
Fuel Type† Waste oil (used crankcase oil up to 50 wt), used synthetic oil, used #1 and #2 fuel oil, used C.C. synthetic ATF #1 and #2, used automatic transmission fluid
Lanair Waste Oil Heaters
1-877-2ARESCO
or 1-877-227-3726
22150 Eight Mile Rd. Southfield MI. 48033
Specializing in car & truck lifts, brake lathes, pipe benders, tire changers, and wheel balancers, and much more! ARESCO is the source
for all of your automotive equipment needs. We carry a full line of equipment and replacement parts for most makes and models. With over
25 years of experience in the automotive industry, we at ARESCO are committed to providing our customers with quality products and
service.
Home Two Post Lifts Four Post Parking Lifts Heavy Duty Lifts Alignment Lifts Scissor Lifts Motorcycle Lifts
Shop Equipment Brake Lathes Pipe Benders Alignment Machines Wheel Balancers Tire Changers Air Compressors
Copyright©2014 www.aresco.org all rights reserved web design by M.Miller
XT75 WASTE OIL HEATER
Designed for fitting in corners without cutting any. The XT-75 comes with all the standard features of our larger models, but with a vertical design for tight spaces. Customer-inspired and designed for small shops and DIY garages.
75,000 BTU’s heat up to 1,700 sq. ft.
Burns #1 and #2 fuel oil (diesel), used crankcase oil (conventional or synthetic), and used ATFM
Small footprint; only 21”W X 26”L floor mounted footprint
Onboard air compressor
Metering pump
Draft gauge
Cleanable in-tank strainer
Preassembled for easy installation
Designed for fitting in corners without cutting any. The XT-75 comes with all the standard features of our larger models, but with a vertical design for tight spaces. Customer-inspired and designed for small shops and DIY garages.
75,000 BTU’s heat up to 1,700 sq. ft.
Burns #1 and #2 fuel oil (diesel), used crankcase oil (conventional or synthetic), and used ATFM
Small footprint; only 21”W X 26”L floor mounted footprint
Onboard air compressor
Metering pump
Draft gauge
Cleanable in-tank strainer
Preassembled for easy installation
XT200 WASTE OIL HEATER
The XT-200 Waste Oil Heater now burns 100% used synthetic oil along with other used fluids. It comes standard with an easy access hinged chamber door for easy clean out. It also features a large clean-out side access panel to the collector box. Some of the new improvements made to the XT models are: easy to remove burner, a noncontinuous spark transformer, an hour meter, and a prime switch. All of these features make it easy for those who compare...buy Lanair!
The XT-200 Waste Oil Heater now burns 100% used synthetic oil along with other used fluids. It comes standard with an easy access hinged chamber door for easy clean out. It also features a large clean-out side access panel to the collector box. Some of the new improvements made to the XT models are: easy to remove burner, a noncontinuous spark transformer, an hour meter, and a prime switch. All of these features make it easy for those who compare...buy Lanair!
XT250 WASTE OIL HEATER
The XT-250 Waste Oil Heater now burns 100% used synthetic oil along with other used fluids. It comes standard with an easy access hinged chamber door for easy clean out. It also features a large clean-out side access panel to the collector box. Some of the new improvements made to the XT models are: easy to remove burner, a noncontinuous spark transformer, an hour meter, and a prime switch. All of these features make it easy for those who compare...buy Lanair!
XT300 WASTE OIL HEATER
The XT-300 Waste Oil Heater now burns 100% used synthetic oil along with other used fluids. It comes standard with an easy access hinged chamber door for easy clean out. It also features a large clean-out side access panel to the collector box. Some of the new improvements made to the XT models are: easy to remove burner, a noncontinuous spark transformer, an hour meter, and a prime switch. All of these features make it easy for those who compare...buy Lanair!
The XT-300 Waste Oil Heater now burns 100% used synthetic oil along with other used fluids. It comes standard with an easy access hinged chamber door for easy clean out. It also features a large clean-out side access panel to the collector box. Some of the new improvements made to the XT models are: easy to remove burner, a noncontinuous spark transformer, an hour meter, and a prime switch. All of these features make it easy for those who compare...buy Lanair!
XTD200 WASTE OIL HEATER
We combine the latest burner technology with the latest lean manufacturing efficiencies to produce a quality, reliable heater at the lowest price in the industry.
We combine the latest burner technology with the latest lean manufacturing efficiencies to produce a quality, reliable heater at the lowest price in the industry.
XTD300 WASTE OIL HEATER
Includes XTD300 Waste Oil Heater
We combine the latest burner technology with the latest lean manufacturing efficiencies to produce a quality, reliable heater at the lowest price in the industry.
Includes XTD300 Waste Oil Heater
We combine the latest burner technology with the latest lean manufacturing efficiencies to produce a quality, reliable heater at the lowest price in the industry.