|
|
Bendpak(Rev M) 9,000 lb Four Post Lifts
Model # HD-7W
Available Options
1-877-2ARESCO
or 1-877-227-3726
Air Bottle
Aluminum Deck
Wheel Kit
Air Line Kit
Rolling Oil Drain
3,000 lb sliding jack platform
6,000 lb sliding jack platform
Aluminum approach
ramps-available in 36" or
48"
Specifications
MODEL HD-7W (Rev. M)
Configuration Short Runway / Wide / High Rise
Lifting Capacity 7,000 Lbs. / 3175 Kg.
Max Capacity / Front Axle 3,500 Lbs. / 1588 Kg.
Max Capacity / Rear Axle 3,500 Lbs. / 1588 Kg.
A - Overall Width 110-1/4" / 2800 mm.
B - Outside Length 174” / 4420 mm.
C - Overall Length 200” / 5080 mm.
D - Height of Columns 100” / 2540 mm.
E – Min. Runway Height 4-1/2” / 114 mm.
F – Max. Rise 82” / 2083 mm.
G - Max. Lifting Height 86-1/2" / 2197 mm.
H - Width Between Columns 100-1/4” / 2,555 mm.
I - Runway Width 19” / 483 mm.
J - Width Between Runways (*) NARROW 37-1/2" / 952 mm.
J - Width Between Runways (*) WIDE 44-3/8" / 1127 mm.
K - Runway Centerline (*) NARROW 56-1/2" / 1435 mm.
K - Runway Centerline (*) WIDE 63-3/8" / 1610 mm.
L - Outside Edge of Runways (*) NARROW 75-1/2" / 1918 mm.
L - Outside Edge of Runways (*) WIDE 82-3/8" / 2092 mm.
M - Drive-Thru-Clearance 86-1/2" / 2197 mm.
N - Length of Runways 164” / 4166 mm.
Min. Wheelbase @ Rated Capacity 115" / 2921 mm.
Min. Wheelbase @ 75% Capacity 100" / 2540 mm.
Min. Wheelbase @ 50% Capacity 85" / 2159 m.
Min. Wheelbase @ 25% Capacity 70" / 1778 mm.
Locking Positions 15
Lock Spacing Every 4" / 102 mm.
Lifting Time 35 Seconds
Standard Motor (**) 208-230 VAC / 50-60 Hz. / 1Ph.
* This dimension may be limited with the addition of rolling jacks. See rolling jack specifications on separate page.
** Special Voltages Available Upon Request
The design, material and specifications are subject to change without notice.
Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to function. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
MODEL HD-7W (Rev. M)
Configuration Short Runway / Wide / High Rise
Lifting Capacity 7,000 Lbs. / 3175 Kg.
Max Capacity / Front Axle 3,500 Lbs. / 1588 Kg.
Max Capacity / Rear Axle 3,500 Lbs. / 1588 Kg.
A - Overall Width 110-1/4" / 2800 mm.
B - Outside Length 174” / 4420 mm.
C - Overall Length 200” / 5080 mm.
D - Height of Columns 100” / 2540 mm.
E – Min. Runway Height 4-1/2” / 114 mm.
F – Max. Rise 82” / 2083 mm.
G - Max. Lifting Height 86-1/2" / 2197 mm.
H - Width Between Columns 100-1/4” / 2,555 mm.
I - Runway Width 19” / 483 mm.
J - Width Between Runways (*) NARROW 37-1/2" / 952 mm.
J - Width Between Runways (*) WIDE 44-3/8" / 1127 mm.
K - Runway Centerline (*) NARROW 56-1/2" / 1435 mm.
K - Runway Centerline (*) WIDE 63-3/8" / 1610 mm.
L - Outside Edge of Runways (*) NARROW 75-1/2" / 1918 mm.
L - Outside Edge of Runways (*) WIDE 82-3/8" / 2092 mm.
M - Drive-Thru-Clearance 86-1/2" / 2197 mm.
N - Length of Runways 164” / 4166 mm.
Min. Wheelbase @ Rated Capacity 115" / 2921 mm.
Min. Wheelbase @ 75% Capacity 100" / 2540 mm.
Min. Wheelbase @ 50% Capacity 85" / 2159 m.
Min. Wheelbase @ 25% Capacity 70" / 1778 mm.
Locking Positions 15
Lock Spacing Every 4" / 102 mm.
Lifting Time 35 Seconds
Standard Motor (**) 208-230 VAC / 50-60 Hz. / 1Ph.
* This dimension may be limited with the addition of rolling jacks. See rolling jack specifications on separate page.
** Special Voltages Available Upon Request
The design, material and specifications are subject to change without notice.
Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to function. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
Features
Shorter length, extra width, and extra height, the HD-7W is the ultimate in compact convenience when you want the lifting power of a BendPak in a tight space like a garage, service bay, or carport.
7,000-lb. maximum lifting capacity
Wide drive-thru with tall lifting height and short runways
Runways include rail-kit for optional accessories
Electric / hydraulic power system
Single hydraulic cylinder mounted underneath runway
Internal anti-sway slider blocks in each column
Oversized self-lubricating cable rollers
Features heavy-duty 3/8" aircraft cable
Rugged 1-1/4" roller axles
Multi-position safety locks in each column
Adjustable lock ladders
Ramps feature non-skid surface
Push-button pneumatic safety release
Optional 4,500-lb. capacity rolling jack available (Model RJ-45)
Shorter length, extra width, and extra height, the HD-7W is the ultimate in compact convenience when you want the lifting power of a BendPak in a tight space like a garage, service bay, or carport.
7,000-lb. maximum lifting capacity
Wide drive-thru with tall lifting height and short runways
Runways include rail-kit for optional accessories
Electric / hydraulic power system
Single hydraulic cylinder mounted underneath runway
Internal anti-sway slider blocks in each column
Oversized self-lubricating cable rollers
Features heavy-duty 3/8" aircraft cable
Rugged 1-1/4" roller axles
Multi-position safety locks in each column
Adjustable lock ladders
Ramps feature non-skid surface
Push-button pneumatic safety release
Optional 4,500-lb. capacity rolling jack available (Model RJ-45)
22150 Eight Mile Rd. Southfield MI. 48033
Specializing in car & truck lifts, brake lathes, pipe benders, tire changers, and wheel balancers, and much more! ARESCO is the source
for all of your automotive equipment needs. We carry a full line of equipment and replacement parts for most makes and models. With over
25 years of experience in the automotive industry, we at ARESCO are committed to providing our customers with quality products and
service.
Home Two Post Lifts Four Post Parking Lifts Heavy Duty Lifts Alignment Lifts Scissor Lifts Motorcycle Lifts
Shop Equipment Brake Lathes Pipe Benders Alignment Machines Wheel Balancers Tire Changers Air Compressors
Copyright©2014 www.aresco.org all rights reserved web design by M.Miller