Bendpak HDS-14LSX Alingment 4 post lift

Specializing in car & truck lifts, brake lathes, pipe benders, tire changers, and wheel balancers, and much more! ARESCO is the source for all of your automotive equipment needs. We carry a full line of equipment and replacement parts for most makes and models. With over 25 years of experience in the automotive industry, we at ARESCO are committed to providing our customers with quality products and service.

HDS-14LSX

SKU 5175171

14,000 pound lifting capacity
CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
Two runway lengths to choose
Heavy-duty turn plates and integrated rear slip-plates included
Multi-position turn plate pockets
Automatic leveling system
Multiple auto-leveling locking positions
Runways include rail-kit for optional accessories
Electric / hydraulic power system
Single hydraulic cylinder mounted underneath runway
Fully enclosed lifting cables, safety locks, and sheaves
Internal "Anti-Sway" slider blocks in each column
Features oversize sheaves and heavy-duty 1/2” aircraft cable
Rugged 1-3/8" roller axles and oversize self-lubricating cable sheaves
Multi-position safety locks in each column with push-button safety release
Runways adjust for different tread widths and feature a durable matte finish
Optional 7,000 pound capacity bridge jacks available (Model RJ7W)

Capacity
Lifting Capacity*14,000 lbs. (6,350 kg)
*Max Capacity / Front Axle 7,000 lbs. (3,175 kg)
*Max Capacity / Rear Axle 7,000 lbs. (3,175 kg)
Rise
A - Min. Runway Height: 7.5" (191 mm)
B - Max. Rise: 70" (1,778 mm)
C - Max. Lifting Height: 77.5" (1,969 mm)
Time to Full Rise: 60 seconds
Outside Dimensions
D - Overall Width: 130" (3,302 mm)
E - Outside Length: 213" (5,410 mm)
F - Overall Length: 242" (6,147 mm)
G - Height of Columns: 92" (2,337 mm)
Inside Dimensions
H - Width Between Columns: 120" (3,048 mm)
I - Drive-Thru Clearance: 98" (2,489 mm)
Runways
J - Runway Width: 20" (508 mm)
K - Length of Runways: 197.5" (5,017 mm)
L - Width Between Runways: 34.5" (876 mm) or 41.5" (1,054 mm)

Alignment
M - Min. 4-Wheel Alignment: 89" (2,261 mm)
N - Max. 4-Wheel Alignment: 156" (3,962 mm)
O - Max. 2-Wheel Alignment: 182" (4,623 mm)
Minimum Wheelbase
Rated Capacity: 140" (3,556 mm)
75% Capacity: 120" (3,048 mm)
50% Capacity: 100" (2,540 mm)
25% Capacity: 80" (2,032 mm)
Locking
Locking Positions: 15
Lock Spacing: 4"
Power Unit
Motor: 220 VAC / 60 Hz / 1 Ph
Noise: 45 dB
Shipping
Weight: 3,216 lbs. (1,458 kg)
Dimensions: 209" x 25" x 33" (5,308 mm x 635 mm x 838 mm)

Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.

BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).